Leading 10 common forklift crashes ， forklift procedure need to take notice of these issues ！.
Leading 10 common forklift crashes ， forklift procedure need to take notice of these issues ！.
Blog Article
Do not ignore the forklift at the office. If the procedure is bad, there will be major accidents in minutes, and there are lots of crashes involving forklifts.
Case 1: The forklift cargo obstructed the driver's sight, and the individual in front can not be located, causing a moving accident.
Case 2: In order to keep the balance of the forklift when raising hefty goods, the staff members utilized their body weight as the counterweight, which almost caused casualties.
Instance 3: The size of the forklift freight exceeds the allowable width of the path and hangs on the roadside shelf, which virtually triggers an mishap.
Case 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift lifts the personnel unlawfully, the forklift vehicle driver does not wear the safety belt, the forklift lifter drops and the motorist is squashed when the forklift surrender.
Instance 7: The forklift chauffeur did not use a seat belt and dropped from the vehicle when it surrendered and was crushed.
Forklift operation must take notice of these matters ：.
Beginning.
1. Prior to beginning, observe the surroundings, and after confirming that there are no barriers that impede the safety and security of driving, beep the horn first and then begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale must be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should initially confirm that the tons is stable and trusted.
4. The beginning must be sluggish and steady.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the pole needs to be slanted backward. .
2. Do not lift the fork too expensive when driving. When going into and leaving the work website or while driving, beware that there will be no challenges overhead. When the tons is taking a trip, the fork must not be raised too high, which will certainly influence the stability of the forklift. .
3. After unloading, the fork should be lowered to the normal driving position prior to driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal must be released first. High-speed sharp turns are restricted. High-speed doglegs will certainly cause the car to shed lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to obey the traffic rules in the factory and should maintain a particular safety distance from the vehicle in front. .
7. When the forklift is running, the load should be in the lowest position that does not hinder the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when piling or loading. .
8. The height of the tons must not block the vehicle driver's sight. In unique conditions, when the item influences the forward vision, drive at a reduced speed when turning around.
9. It is restricted to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to stand on the fork to hold items and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a timely fashion, and they will never run with health problems or conceal them.
loading and dumping.
1. When fork-loading products, the distance in between the two forks need to be changed as needed to make the lots of the two forks well balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is forbidden to collaborate with a single fork or use a fork top or draw. In special scenarios, security indication need to be set up to remind bordering pedestrians. .
3. In the process of packing and unloading things, the forklift should be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the tons, and it needs to be noted that the fork idea should not touch other items or objects. The tons should be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted onward slightly when the tons is decreased to allow for simple positioning of the lots and removal of the forks. .
6. It is restricted to fork items at broadband and hit hard things with the fork head. .
7. When the forklift is working, it is prohibited for individuals to stand around the fork, so as to avoid the collapse of the goods and injure people. .
8. Straining is forbidden, and it is prohibited to make use of forks to lift workers to participate in high-altitude operations to stay clear of high-altitude dropping accidents. .
9. It is not allowed to use the brake inertia to slide, put, round or roll items. .
10. It is not enabled to make use of forks to select, transform pallet dump.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should unload the goods or lower the fork frame.
2. Draw the parking brake take care of to dead or depress the parking brake switch.
3. The engine Stand-on Electric Pallet Stacker is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the car's view and does not exceed 1 minute).
4. Eliminate the key. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance should be examined, and gas, lubing oil and cooling water ought to be added.
2. Examine the safety efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. During the operation of the forklift, examine whether the stress and temperature level are typical.
5. After the forklift is running, the exterior leakage must additionally be examined and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You have to examine before leaving the vehicle;.
2. When you encounter a person in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be as well sharp to stop the propensity of "free switching";.
6. Running up and down the slope should be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is more than 10%, the automobile should be driven in reverse when going downhill;.
8. When the forklift workers carry the goods and progress, if they encounter big or hefty goods and most likely to the chauffeur's view, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the area with the very Stand-on Electric Pallet Stacker same size as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844